Overview
As one of the interfaces on mobile devices and tablets, the key function of the audio jack is to play music. However, its other usage cannot be ignored—the audio jack can also be used to transmit data.
More usages of the audio jack to connect devices are being developed all the time. Peripherals like iHealth Lab’s Glucometer[1] (blood sugar calculator), the Irdroid[2] (provides infrared remote functions to control TVs, set-top boxes, and audio components), and Flojack*[3], an NFC reader (creates near-field-communications functionality for interaction with NFC tags or mobile devices) are made possible through audio jack connectivity.
Since wearable devices and peripherals have broad market prospects, I believe that the audio jack will be the prime data communication portal. In this article I will explain more details of this new feature.
Introduction
The audio jack interface has two standards: OMTP and CTIA[4]. OMTP is an international standard; ATIS is an American standard, which is used on the Apple iPhone* and iPad*. They are different with V-Mic and GND position, the difference are shown in Figure 1.
How to transmit data
When we send a 0x00FF data value, the first step is to convert the digital data value to an analog signal. We need to modulate the data value. Normally, we use a sine wave carrier for the analog signal.
The second step, in Android systems, is to call the audioTrack API[7] function to play the buffer. The following code sends data to the buffer using the audioTrack function.
01 public void send(byte[] bytes_pkg) {
02 int bufsize = AudioTrack.getMinBufferSize(8000,
03 AudioFormat.CHANNEL_OUT_MONO,
04 AudioFormat.ENCODING_PCM_16BIT);
05 AudioTrack trackplayer = new AudioTrack(AudioManager.STREAM_MUSIC,
06 8000, AudioFormat.CHANNEL_OUT_MONO,
07 AudioFormat.ENCODING_PCM_16BIT, bufsize,
08 AudioTrack.MODE_STREAM);
09 trackplayer.play();
10 trackplayer.write(bytes_pkg, 0, bytes_pkg.length);
11 }
How to receive data
As a receiver, we need to translate the analog signal to a data value, demodulate the signal to remove the carrier signal, and decode the data by protocol. The protocol can be a public data format or private definition protocol.
In Android systems, we use the audioRecord API[8] function to record the audio
1 public void receive(){
2 int minBufferSize = AudioRecord.getMinBufferSize(AUDIO_SAMPLE_FREQ, 2,
3 AudioFormat.ENCODING_PCM_16BIT);
4 AudioRecord ar = new AudioRecord(MediaRecorder.AudioSource.MIC,
5 AUDIO_SAMPLE_FREQ, AudioFormat.CHANNEL_IN_MONO,
6 AudioFormat.ENCODING_PCM_16BIT, minBufferSize)
7 ar.startRecording();
8 }
How to harvest energy from audio signals
Obviously, power is required to drive the circuit for audio jack peripherals. For example, the L-channel sends data information. The R-channel sends sustained square or sine waveforms. These waveforms can be transformed to power that enables the MCU (Micro Controller Unit) and several sensors.
Case study: infrared peripherals
Androlirc[9] is a Github-based project. Its function is to use the audio jack interface to send infrared commands. We can study this project to understand audio jack data communication. Androlirc uses the LIRC[10] library to create a data buffer. This library is a Linux* infrared library that supports several types of interfaces, for example: USB, audio jack, etc. Androlirc can use the LIRC library as a data encapsulation or data capsulation. Across the marketplace, you can find many infrared coding types, such as the RC-5 and RC-6 protocols. In the example, we use the RC-5 protocol to control a TV set. First, we need to modulate the data value using a 38k frequency sine waveform to generate buffer data; then we use the Android audio API function to play the audio buffer data. Meanwhile we can use one of two channels to play a sine or square waveform to power on the peripherals hardware.
Case study: audio jack development tools
NXP Semiconductors’ new smartphone solution, Quick-Jack*[11], is a tool/development board based on a prototype project called Hijack. Hijack[12] is a University of Michigan student project. The Hijack platform enables a new class of small, cheap, phone-centric sensor peripherals that support plug-and-play operations. We can use the NXP Quick-Jack developed board to help build our prototype product design.
Figure 4 shows a smartphone displaying the indoor temperature from the audio jack-based peripheral temperature sensor.
Figure 5 shows how we can control the peripheral’s LED using an Android-based application.
Summary
Wearables and smart device peripherals are becoming more prevalent in the consumer market. The audio jack as a data communication function is being adopted by more and more ODMs and iMakers. Perhaps in the future, audio jack data communication functions will be universally supported by smartphone OSs.
For more such Android resources and tools from Intel, please visit the Intel® Developer Zone
Source: https://software.intel.com/en-us/articles/using-the-audio-jack-as-data-interface-on-android-systems
Follow Us
